Cartridge Heaters - Cartridge Heaters Exporter, Manufacturer, Distributor, Supplier, Trading Company, Chennai, India

Product Code : 04

Product Specification

Cartridge Heaters
We are offering Cartridge Heaters. IH Cartridge Heaters provide a convenient, dependable and efficient method of applying concentrated heat to solid metal components such as Die Blocks, Moulds, Platens, Heat Sealing tools etc,. or practically any application where a compact, insert type heating is desirable.

Hot Rod Cartridges Feature:

Long trouble free service
Sheaths of precision dimensions and tolerances for intimate contact with reamed holes.
High watt density units with stainless steel sheaths providing stable non oxidizing surfaces.
Heating elements positioned close to the outside surface for maximum heat transfer, minimum core temperature and faster heating .
Heating element supported on high quality ceramic and solidly packed magnesium oxide.
Variety of connections, including plated steel screws and nuts or glass insulated nickel wires.

Insulation:
Holes in metal blocks for cartridge insulation should be drilled and reamed to listed sizes .

Finished units are sufficiently undersized to provide a slip insulation, when expanded by heat, cartridge will fit snugly to give maximum heat transfer. If air gaps are permitted due to rough drilling or improper sizing of the bore, hot spots on the sheath surface will result with consequent deterioration of the heater. Hole must also be free from oil to avoid heater contamination, again shortening life.

Mounting and Extracting Lugs
IH Heaters can be fitted with flanged on tag mounting lugs to hold heater firmly in place and lead wires should be supported when in a moving die or platen . Also, lugs ease heater removal.

Control Position
To prevent overheating when using units rated at maximum watt density as listed, it is recommended that the control point be located within 12mm ( 1/2" ) of the hot rod unit.

High Density

This construction ensures that the resistance wire temperatures are dissipated much more rapidly through the sheath than is possible with conventional cartridge construction. Since this fast rate of heat transfer greatly reduces the temperature difference between the resistance wire and sheath.

Sheath Material
Heater manufactured with stainless steel sheath allowing for continued operation at elevated temperatures.

Lead Wires
Standard length is 250mm long ( 10" ) of double fibre glass covered stranded copper wire.

Ordering

Specify the following
Diameter
Length
Voltage
Wattage
Lead Length and special features if required.

Other Products in 'Cartridge Heaters' category

High Watts Catridge Heaters

<< Back